Define: 1) Break water 2) Surges 3) Terminal area
[3 marks]Explain classification of airports as per I.C.A.O.
[4 marks]Discuss characteristics of ship that affect the harbour design.
[7 marks]Define Beaufort scale and its use.
[3 marks]Write short notes with neat sketch on: i) Littoral drift.
[4 marks]State the reason to provide fenders on docking platform? Discuss the wooden and rubber fenders with neat sketch.
[7 marks]Explain factors determining selection of breakwater and draw the different arrangement of the breakwaters.
[7 marks]Differentiate between: i) Wharf and jetty
[3 marks]List the factors affecting selection of a dredger.
[4 marks]Explain the dry dock with neat sketch.
[7 marks]Differentiate between:
[3 marks]Mound type and vertical wall type breakwater.
[ marks]List different types of dredgers. Explain dipper dredger with neat sketch.
[4 marks]Enlist design requirements of wet dock wall along with neat sketch.
[7 marks]Classify comparison of air transport with other modes of transportation.
[3 marks]Explain the procedure of orienting the runway.
[4 marks]Classify different characteristics of an aircraft and their affect in planning and design of airports.
[7 marks]Draw a neat sketch of an aeroplane and mention each component parts.
[3 marks]Compare the recommendation of FAA and ICAO with reference to airport master planning.
[4 marks]The length of runway under standard condition is 1500 m. the airport site has an elevation of 270 m. its reference temperature is 32.94°C. if the runway is to be constructed with an effective gradient of 0.20 percent. Determine the corrected runway length.1
[7 marks]Draw a neat cross-section of a main taxiway for an international airport. Show the various taxiway geometric geometrics in the diagram.
[3 marks]Enlist the different systems of aircraft parking and explain the satellite system.
[4 marks]Explain the various taxiway geometrics as recommended by ICAO.
[7 marks]Draw a typical layout of airport terminal building.
[3 marks]Enumerate the various criteria’s for designing the filter material for sub surface drainage.
[4 marks]Explain with neat sketch, requirements of suitable sites for locating localizer antenna and glide slope antenna at the airport having ILS facility.
[7 marks]