Answer any Seven out of Ten. દશમ ાથી કોઇપણ સ તન જવ બ આપો. 1. Define Limit state and state its types. ૧. લિલિટ સટટની વયાખયા આપો અન તના પરકાર જણાવો. 2. State partial safety factor for steel and concrete. ૨. સટીિ અન કોનકરીટ િાટ આલ િક સિાિતી આક જણાવો. 3. Define characteristic load and Charecteristic strength. ૩. િાકષણીક ભાર અન િાકષલણક સાિરથ ની વયાખયા આપો. 4. Using S.P.16,Calculate limiting moment of resistance for beam section 400 mm x 500 mm effective. Use M20 concrete & fe 415 steel. ૪. S.P.16 નો ઉપયોગ કરીન 400 mm x 500 mm અસરક રક મ પવ ળ બીમ મ ટ લીમીટીગા મોમન ટ ઓફ રઝ ીસટનસ ગણો. M20 કોકરા ીટ ગરડ અન Fe 415 ગરડ સટીલ વ પરો 5. Using S.P.16, find spacing of 8mm diameter vertical strirrups of fe 415 grade steel for Vus/d=2.0 KN/cm. Use M20 grade concrete. ૫. S.P.16 નો ઉપયોગ કરીન Vus/d=2.0 KN/cm મ ટ 8mm વય સન fe 415 ગરડન સટીલન વટીકલ સટીરપસન ા સપશ ીનગ શોધો. M-20 કોકરીટા ગરડ લો. 6. State Max. depth of neutral axis for fe250grade steel when effective beam depth =300 mm ૬. 300 mm અસરક રક ઊા ડ ઈ ધર વત બીમની fe250 ગરડન સટીલ મ ટ નય ટરલ અકષિસ ની મહતતમ ઊા ડ ઈ જણ વો . 7. State I.S. requirements for minimum reinforcement in R.C.Column footing. ૭. આર.સી.કૉલમ ફ ટીગા મ ટ આઈ.એસ.મજ બ નય નતમ પરબલન(રઈ નફોસમસ નટ) જણ વો. 8. The design compressive strength of concrete is taken as 0.446 f why? ck ૮. કોનકરીટની ડીઝાઈન કોમપપરસીવ સટરર 0.446 f કમ લવ મ ા આવ છ? ck 9. State I.S.criteria for the maximum spacing of Main and Distribution steel in Slab. ૯. સલબમ ા મખ ય અન ડીસટરીબયશ ન સટીલન સળીય ન મહતતમ સપસીગ મ ટન આઈ.એસ.પરમ ણન ધ ર ધોરણ જણ વો 10. What is Development length? Write Equation to find Development length of reinforcement bar as per IS 456 -2000 ૧૦. ડવલોપમનટ લાબ ઈ શ ા છ? IS 456 -2000 મજ બ સકષળય ની ડવલોપમનટ લાબ ઈ ગણવ મ ટન ા સતર લખો.
Calculate tension & compression reinforcement required for Rectangular Doubly R.C.C. beam section 300 mm X 500 mm to resist a factored moment of 250 kN.m. Cover on both side is 40 mm. Use M20 concrete & Fe 415 steel. (ડ) એક 250 kN.m ફકટડસ મોમનટ વહન કરી શક તવ 300 mm X 500 mm મ પન કષિપરબકષલત કોકરીટા બીમ મ ટ ત ણ અન દ બ પરબલનની ગણતરી કરો.બાન તરફ અસરક રક કવર 40 mm છ. M20 કોકરા ીટ ગરડ અન Fe 415 ગરડ સટીલ વ પરો.
[4 marks]For a R.C.C. beam,state I.S.provisions for the following. (1) Minimum and Maximum % of tension steel. (2) Minimum and Maximum spacing of of bars in tension. (3) Effective span of simply supported beam. (ડ) આર.સી.સી.બીમ મ ટ નીચ જણ વલ કષવગતો મ ટ I.S.પરમ ણન ી જોગવ ઇઓ જણ વો. (1) મહતતમ અન નયનતમ ટનશન સટીલની ટક વ રી(%) (2) ટનશનમ ા સકષળય ન ા મહતતમ અન નયનતમ સપકષશાગ (3) સ દી રીત ટકવલ બીમનો અસરક રક ગ ળો.
[4 marks]Find the Moment of resistance of a Singly R.C.beam of size 230 mm X 600 mm reinforced with 4-16 mm ф bars of Fe415 steel.Take M20 grade of concrete & effect. cover= 50 mm. 1/4 (અ) 230mmX600mm મ પન એકલ પરબકષલત કોકરીટા બીમમ ા 4-16 mm ф, Fe-415 ગરડન ા સટીલ ગોઠવલછ.બીમ મ ટ પરકષતરોઘ ધ ણસ શોધો.M-20 કોકરીટા ગરડ અન અસરક રક કવર50= mm લો.
[3 marks]Eplain Under reinforced and Over reinforced concrete section. (અ) અાડર રઇ નફોસડસ અન ઓવર રઇ નફોસડસ કોકરીટા સક શન સમજાવો..
[3 marks]Write steps for analysis of Doubly R.C.C. beam with necessary formula. (બ) કષિપરબકષલત કોકરીટા બીમની એન લીસીસ કરવ મ ટ જરરી સટપસ સતરો સકષહત લખો.
[3 marks]Give difference between Singly & Doubly R.C. beam 0 (બ) એકલ પરબકષલત કોકરીટા બીમ અન કષિપરબકષલત કોકરીટા બીિ નો તફાવત આપો. ૦
[3 marks]Calculate Limiting Moment of resiatance of Tee beam for the following data. 1. Width of web=350 mm 2. Effective depth of beam = 750 mm 3. Thickness of slab =120 mm 4. Flange width=1500 mm Use M20 grade concrete & Fe 415 grade steel. (ક) ટી-બીમ મ ટ નીચન ી કષવગતો પરથી લીમીટીગા મોમન ટ ઓફ રકષસસટનસ શોધો. 1. વબની પહોળ ઈ= 350 mm 2. બીમની અસરક રક ઊા ડ ઈ=750 mm 3. સલબની જાડ ઈ =120 mm 4. ફલજ ની પહોળ ઈ=1500 mm M20 કોકરા ીટ ગરડ અન Fe 415 ગરડ સટીલ વ પરો.
[4 marks]Determine effective Flange Width for simply supported R.C. Tee beam from the following data. Beam is supporting 2-span one way continuous slab of clear span 3m on each side. 1.Width of rib=350 mm 2. Span of beam = 7.5 m 3. Thickness of slab =120 mm. Use M20 grade concrete & Fe 415 grade steel. Check the flange width as per I.S.code (ક) નીચ આપિ લવગતો પરરી સાદી રીત ટકવિા આર.સી. ટી-બીિ િાટ ફિજ ની અસરકારક પહોળાઈ ગણો. બીિ 3m ચોખખા ગાળા વાળા 2-સપાન વન-વ કાટીનયઅ સ સલબન બાન બ જ ા ટકવ છ. 1.રીબની પહોળાઈ= 350 mm 2.બીિનો ગાળો=7.5m 3.સિબ ની જાડાઈ =120 mm. M20 કોકરા ીટ ગરડ અન Fe 415 ગરડ સટીલ વ પરો. ફિજ ની પહોળાઈ I.S.કોડ અન સ ર ચક કરો.
[4 marks]Write steps for Design of shear reinforcement. (બ) કતસન પરબલન (શીયર રઇ નફોસસમનટ)ની ડીઝ ઇન મ ટન સટપસ લખો.
[3 marks]Design axially loaded short column of size 500 mmX500 mm to carry factored load of 3000 kN. Take M20 concrete & Fe 415 steel. (ક) 3000 kN ગ ણીતભ ર લવ મ ટ અિીય ભ ર ધ રણ કરત ટાક , 500 mmX500 mm મ પન કૉલમની ડીઝ ઇન કરો. M20 ગરડ કોકરા ીટ અન Fe 415 ગરડ સટીલ લો.
[4 marks]Explain Tied column and Spiral column with neat sketch. (ક) ટ ઈડ કૉલમ અન સપ ઇરલ કૉલમ સવચછ આકકષત િ ર સમજાવો.
[4 marks]For an isolated column footing, explain with neat sketch the position of critical sections for Bending Moment, One way shear and Two way shear. (અ) આઈસોલટડ કૉલમ ફકષટાગ મ ટ બનડીનગ મોમન ટ, વન-વ શીયર અન ટ -વ શીયર મ ટ કરીટીકલ સકશનન ા સથ ન સવચછ આકકષત િ ર સમજાવો.
[3 marks]A Pad footing of size 3 m x 3 m is provided for a R.C.Column of size 500 mm x 500 mm. The net upward pressure is 270 KN/m2. Design for thickness and steel reinforcement for the footing only. No checks are required. Use M20 concrete & Fe 415 steel 2/4 (અ) 500mm x 500 mm મ પન આર.સી.કૉલમ મ ટ 3m x3m મ પન ા પડ ફકષટાગ મ કલ છ. નટ અપવડસ પરસર 270 KN/m2 છ.ફકત ફકષટાગની જાડ ઈ અન સટીલની કષડઝ ઇન કરો. ચક જરરી નથી. M20 કોકરા ીટ ગરડ અન Fe 415 ગરડ સટીલ વ પરો.
[3 marks]Explain Simply supported two way slab and Restrained two way slab with I.S.Code provisions. (અ) I.S.કોડની જોગવ ઇઓ સ થ સ દીરીત ટકવલ ટ -વ સલબ અન રીસટરઇનડ ટ -વ સલબ સમજાવો.
[3 marks]Asimply supported two way slab for a clear room size 3 m X 3 m is provided. The slab is resting on 300 mm thick wall on all four sides. Assume corners are not held down. The slab carries live load =3 KN/m2 & floor finish =1 KN/m2. Design the slab for thickness and reinforcement only. No checks are required. Use M20 conc.and fe 415 grade steel. (અ) 3 m X 3 m ચોખખ મ પન રમ મ ટ સ દી રીત ટકવલ ટ -વ સલબ મકવ મ ા આવલ છ. સલબ 300 mm જાડી કષદવ લ પર ચ ર બ જ એ ટકવલ છ. સલબન ખણ દબ વલ (હલડ ડ ઉન) નથી તમ ધ રો. સલબ પર 3 KN/m2 નો જીવાતભ ર અન 1 KN/m2 નો ફલોર ફીનીશ ભ ર લ ગ છ. ફકત 3/4 સલબની જાડ ઈ અન રઈ નફોસસમનટ(સટીલ)ની કષડઝ ઇન કરો. કોકરા ીટ ગરડ M- 20 અન સટીલ ગરડ fe-415 લો.ચક જરરી નથી.
[3 marks]Draw at least two views showing reinforcement details for the one way continuous slab having 3 equal spans. Assume necessary data . (બ) એક સરખ ૩-ગ ળ વ ળ વન-વ સતત(કાટીનય અસ) સલબ મ ટ રઇ નફોસસમનટ(સટીલ)ની કષવગતો દશ સવતી આકકષત દોરો. ઓછ મ ા ઓછ બ દખ વ દોરો. જરરી કષવગતો ધ રો.
[4 marks]Aone way continuous slab having 3- equal effective span of 3.75 m each is subjected to L.L=3 kN/m2 & F.F. =0.6 kN/m2.Find slab thickness and calculate span moments and support moments only. Check the slab thickness for flexure.Use M20 conc.and Fe 415 grade steel. (બ) 3.75 m ન અસરક રક,એક સરખ 3-ગ ળ વ ળ વન-વ સતત (કાટીનય અસ)સલબ મ ટ જીવાતભ ર (L.L)=3 kN/mm2 અન ફલોરફીનીશ ભ ર ( F.F.)=0.6 kN/mm2 હોય તો સલબ ની જાડ ઈ શોધો અન ફકત સપ ન મોમનટ અન સપોટસ મોમનટની ગણતરી કરો.સલબની જાડ ઈ ફલિરમ ા તપ સો. કોકરા ીટગરડ M- 20 અન સટીલ ગરડ Fe-415 લો.
[4 marks]Calculate No. of 20 mm diameter reinforcement bars required for a singly R.C. beam of size 230 mm X 500 mm subjected to factored moment of 120 KN.m. Take effective cover = 40 mm.Use M20 grade concrete & Fe 415 grade steel. (અ) 120 KN.m.ની ફકટડસ મોમનટ વહન કરી શક તવ 230 mm X 500 mm મ પન એકલ પરબકષલત કોકરીટા બીમ મ ટ 20 mm વય સવ ળ સકષળય ની સખા ય ગણો.અસરક રક કવર = 40 mm લો. M20 કોકરા ીટ ગરડ અન Fe 415 ગરડ સટીલ વ પરો.
[4 marks]Draw plan and sectional elevation of an isolated sloped R.C.C.column footing. Show reinforcement details thereon. Assume necessary data . (બ) આઇસોલટ ડ,ઢ ળવ ળ (સલોપડ) આર.સી.સી.કૉલમફકષટાગન પલ ન અન સકશનલ એલીવશ ન દોરો.તમ ા રઇ નફોસસમન ટ ની કષવગતો સપષટ દશ સવો. જરરી કષવગતો ધ રો.
[4 marks]Explain types of stirrups with neat sketch. (ક) સવચછ આકકષત િ ર સટીરપસન પરક ર સમજાવો.
[3 marks]For control of deflection, Explain span/effective depth ratios and Modification factor. (ડ) ડીફલકશન કાટરોલ મ ટ સપ ન/અસરક રક ઊા ડ ઈ નો ગણ ોતતર અન મોડીફીકશન ફકટર સમજાવો. 4/4
[3 marks]Asingly reinforced rectangular beam of size 300mm X 500 mm effective is subjected to factored shear force of 90 KN. The beam is reinforced with 1.2 % tension steel. Design shear reinforcement. Take M20 grade concrete. (બ) એક 300mm X 500 mm અસરક રક મ પન એકલ પરબકષલત લાબચોરસ બીમ પર 90 KN ન ા ગ કષણત કતસનબળ લ ગ છ.બીમમ ા 1.2 % ત ણ પરબલન ગોઠવલ છ. કતસનપરબલન(શીયર રઇ નફોસસમન ટ) ની ડીઝ ઇન કરો. M20 કોકરા ીટ ગરડ વ પરો.
An axially loaded short column of size 300 mm x 300 mm is reinforced with 4-20 mm ф bars as longitudinal steel. Determine ultimate load carrying capacity of column. Design lateral tie also. Take M20 concrete & Fe 415 steel. (ડ) 300 mm x 300 mm મ પન ,અિીય ભ ર ધર વત ટાક સતાભમ ા 4 – 20 mm ф સળીય લોજીા ટય ડીનલ સટીલ તરીક મક લ છ. કૉલમ િ ર વહન થતો મહતતમ ભ ર શોધો. લટરલ ટ ઈની પણ ડીઝ ઈન કરો. M20 ગરડ કોકરા ીટ અન Fe 415 ગરડ સટીલ લો.
[4 marks]A R.C.Column of size 400 mm x 400 mm is designed to carry factored load of 1800 kN by providing 4-25mm ф bars as Longitudinal reinforcement and lateral tie of 8mm ф @300mm c/c. The unsupported length of column is 3.2 m and both of its ends are hinged. Check the following for the column. (1) whether column is axially loaded or not? (2) whether column is short or long ? (3) whether % of longitudinal steel provided is within permissible limits or not? (ડ) 1800 kN નો ગકષ ણત(ફકટડસ)ભ ર વહન કરી શક તવ એક 400 mm x 400 mm મ પન R.C. કૉલમમ ા લોજીા ટય ડીનલ સટીલ તરીક 4-25mm ф ન સકષળય અન લટરલ ટ ઈ 8mm ф @300mm c/c મકવ મ ા આવલ છ. કૉલમની અનસપોટડ લાબ ઈ 3.2 m અન કોલમન બાન છડ કષમજાગરલ (કષહનજડ) છ. તો કોલમ મ ટ નીચન ી બ બતો તપ સો. (1) કૉલમ અિીય ભ રથી લદ યલ છ ક કમ? (2) કૉલમ ટાકો(શોટસ) છ ક લ ાબો(લોગા )? (3) મકવ મ ા આવલ % લોજીા ટયડ ીનલ સટીલ સવીક યસ મય સદ મ ા છ ક કમ?
[4 marks]Design one way simply supported slab for a clear span of 3.2 m. The slab is resting on 300 mm thick wall and subjected to live load =2.5 kN/m2 & floor finish load =1 kN/m2. Check the slab for cracking and deflection only. Use M20 conc.and Fe 415 grade steel. (ક) 3.2 m ચોખખો ગ ળો ધર વત સ દીરીત ટકવલ વન-વ સલબ(ધ બ )ની કષડઝ ઇન કરો. સલબ 300 mm જાડી કષદવ લ પર ટકવલ છ. સલબ પર 2.5 kN/m2 નો જીવાતભ ર અન 1 kN/m2 નો ફલોર ફીનીશ ભ ર લ ગ છ. ફકત કરકીગા અન ડીફલકશન મ ટ સલબ ની ચક સણી કરો. કોકરા ીટગરડ M- 20 અન સટીલ ગરડ Fe-415 લો.
[7 marks]